Redline Cycle Service, Inc.


                                                                    Any item shipped U.S. Mail / UPS to anywhere in the world

                                                                                                Back to Main Catalog Index

  Exhaust System Parts:

Gaskets  /  Studs   / Nuts  /  Half-Collars  /  LTD Hanger Bolts



 
 
 
........... Forget about those copper donuts......This is the 21st century.
Superior in every respect to the OEM Kaw copper donut exhaust gasket. These thicker, stronger gaskets can be used several times over and will still seal. 
Do you have an aftermarket header, and have to double up on the exhaust gaskets or the flange meets the head before it's tight? ....Problem solved!!
If you have to remove your pipe to change oil, no more new gaskets every time!

Expensive? - not when you consider that you can even re-use them - sometimes 2 or 3 -
You certainly can't say that for those useless copper donuts. 

                set of 4   $39.95  ( Re-Useable)

In Stock at Redline Cycle

 


 

...............................
     Left:  Aftermarket / standard type "copper donut" exhaust gaskets           Right:   Kawasaki OEM exhaust gaskets > Same apps. as at left
     for all 1973 thru 1980 900 & 1000 models                                                            $20.00 / set 4     Limited Stock
     (and 1981 thru 1985 1000 / 1100 models)..
                                                      $2.29 each / $8.00 set of 8

In Stock at Redline Cycle


 
New exhaust hardware for your 900 or 1000!! Sets include enough for one bike.

Grade 8, serrated flange nuts for mounting your pipe...way better than the originals:
6mm for 900 models  $6.25 set 
8mm for 1000 models $7.95 set

New OEM exhaust studs: 
6mm for 900 models  $6.95 ea. 
8mm for 1000 models $10.95 ea.
 
 

In stock at Redline Cycle
 


 
........................ Exhaust half collars for all 1973 to 1980 900 & 1000 models.......
 
 

.......8 per bike.....Sold  as a set....

                            $50.00 / set 

Limited Availability

 


 




 

.................. For all 900 / 1000 models using a non-original exhaust and retaining the center stand -

Kerker-type centerstand stop bracket keeps the retracted centerstand from hitting the exhaust megaphone -

Installs under the RH side center stand pivot nut -

( pivot shaft and nut  (available seperately) are not included with this stop - shown for reference only)

                                                  $15.99 each
Limited Availabilty


 
........................... For all 1976 thru 1980 900 & 1000 LTD models.......

Rear Hanger bolt - These high-quality bolts have a nicely 
                             chromed 17mm head

                                          $8.95 each

Limited Availabilty

E-mail us at > jim@redlinecycle.com

 Return to Home Page