Redline Cycle Service, Inc.

 

                                                                                                        Back to Main Catalog Index

Brake Rotor Mount Bolts / Caliper mount Bolts



 



..................... Top:  Replacement brake rotor mount bolts for front & rear applications on all 1976 thru 1977 900 models, and all 1000 models (except  KZ1000E Shaft drive).........4 per disc rotor.......
                                                   $2.79 each

Bottom: OEM Kawasaki Disc Lock Tabs for front & rear applications on all 1976 thru 1977 900 models, and all 1000 models (except  KZ1000E Shaft drive).........2 per disc rotor.......
                                                    NLA 
In Stock at Redline Cycle
 
 


 

..................

a

For mounting the front and rear brake rotors on all 1976 thru 1980 Kawasaki 900 & 1000 models (except 1979 & 1980 KZ1000E / ST).......

  Kawasaki OEM 10mm flange bolts not only look good, but when properly torqued eliminate the need for using the factory lock tab washers.....

4 per disc rotor / Front or rear
                                           $4.19 each
In Stock at Redline Cycle
 
 
 


 


............
 
 
For all 1973 thru 1975 Z-1 900 models ............

High strength / Grade 8 / Fine Thread disc mount bolts.....

  The Kawasaki OEM version of this special fastener is 
         over $8.00 each!!.... and not nearly as strong...

        6 per disc...............

                               $1.29 each

                                $6.00 per set / 6

In Stock at Redline Cycle


 


Kawasaki OEM NOS chrome front caliper mount bolts....

Original style for all 1976 thru 1980 900's and 1000's with the domed top......
                                           $8.99 each 

In Stock at Redline Cycle


 


For all 1973 thru 1980 900 & 1000 models ......

High strength flange bolts for mounting the front brake calipers to the fork legs ........   $5.99 each 

*Due to the fact that many old Kaws have had modifications done to the front braking systems (many not done too well), it is strongly recommended that the clearance between the tip of the mount bolt and the brake rotor be checked ....... Contact between the mount bolt and disc can cause rotor damage

In Stock at Redline Cycle

b

e-mail us at > jim@redlinecycle.com

 Return to Home Page